Adapter -- Male NPSH/Quick Connect

Converts from 1" or 1½" NPSH thread to foresty quick connect. Note that quick connect fittings are genderless -- no worrying about male & female. Also, there is only one quick connect facing size -- so 1" and 1½" QC's will mate. Use one of these to adapt the nozzles to quick connect hoses. Also, this adapter and its female counterpart will allow you to mix threaded and quick connect hoses in the same system.

Adapter -- Female NPSH/Quick Connect

Converts from 1" or 1½" NPSH thread to foresty quick connect. See the description for the male adapter.

Adapter -- Quick Connect to Garden Hose

Allows a garden hose to be connected to a quick connect coupled hose. Adapters in male or female ¾" garden hose thread. Aluminum

Adapter -- Footvalve

Aluminum fitting designed for use on a 2" footvalve when used with a 1½" suction hose. Threaded NPSH -- 2" male x 1½" female.

Adapter -- Tandem 2" to 1½"

Converts between 2" and 1½" sizes. Machined from light alloy to be compatible with aluminum pumps and fittings.

• Between 2" suction hose & 1½" pump
• Between 1½" discharge hose & 2" suction port of second pump for tandem pumping operations over long distances or great elevation changes.

Reducing Adapter -- 2" to 1½"

Thread Protector

This fitting is designed for use on pumps to protect the threads on the suction and discharge ports of the pump housing from possible damage caused by cross threading or other incidental abuse. With the use of the protector, should such damage occur, this fitting (and not the pump housing) could then be replaced. Repairs would be less expensive and more quickly completed. Recommended for NPSH hose systems.

Adapter -- 1½" male NPSH x 1½" female NH

Cap -- 1½" NPSH

Use for capping an unused leg of a wye'd hose lay or for fitting protection while in storage or transit. Comes with a 6" detachable security chain.

Cap -- Forestry Quick Connect

Use for capping or protection of lines, fittings and hose segments.

Cap -- Brass, 1½" NPSH Threaded

Use for capping or protection of lines, fittings and hose segments. With detachable security chain. Rocker lug style.

Cap -- Brass, 1" NPSH Threaded

Use for capping or protection of lines, fittings and hose segments. With detachable security chain. Note that cap is hex style (not rocker lug)

Adapter --CamLock Part 'A'

Male CamLock by female NPT. Attaches to suction port of pump for quick and reliable attachment of suction hose. Aluminum.

Adapter -- CamLock Part 'B'

Female CamLock by male NPT. Aluminum.

Adapter -- CamLock Part 'C'

Female CamLock by Hose Shank. Aluminum.

Adapter -- CamLock Part 'D'

Female CamLock by female NPT. Aluminum.

Adapter -- CamLock Part 'F'

Male CamLock by Male NPT. Aluminum.

Coupling -- Short-Shank

Coupling, set -- Aluminum, NPSH with hose barb.

Consists of 2 parts -- 1 with male thread and 1 with female thread, each with hose shank. Can be used to splice 2 hoses or as couplings for a suction or discharge hose. Requires a clamp to secure each hose to hose-barb. Not for high pressure applications.